Eni Industrial Oil
ENI offers a comprehensive range of industrial lubricants designed to support the performance, protection, and efficiency of machinery across diverse industrial applications. Its portfolio includes solutions for hydraulic systems, gears and chains, compressors, turbines, guides and slideways, heat transfer systems, and general-purpose lubrication, helping equipment operate reliably under a wide range of operating conditions.
Hydraulic Oil Products
Arnica
Arnica ID
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Specification:
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category VICKERS M-2950
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
Arnica 104/FR
ARNICA 104/FR ID is a non-flammable hydraulic fluid with high Viscosity Index and low pour point which satisfies the requirements of hydraulic circuits in industrial machinery.
It consists of a glycol/water solution additive-treated to prevent corrosion. (ISOHFC classification) The fire-resistance of the product is essentially attributable to its water content.
Specification:
Danieli Standard 0.000.001
Arnica S FR (ISOVG46)
ARNICA S FR ID is a non-flammable hydraulic fluid with high Viscosity Index and low pour point which satisfies the requirements of hydraulic circuits in industrial machinery.
It consists of a glycol/water solution additive-treated to prevent corrosion. (ISOHFC classification) The fire-resistance of the product is essentially attributable to its water content.
Spesification
Danieli Standard 0.000.001
Arnica ID 22
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Specification:
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category VICKERS M-2950
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
Arnica ID 46
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Specification:
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category VICKERS M-2950
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
Arnica ID 68
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Specification
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
Arnica ZF ID 46
eni ARNICA ZF ID are ashless antiwear hydraulic oils for application in hydraulic systems where cleanliness is essential.
APPLICATIONS
eni ARNICA ZF ID oils are especially suitable as hydraulic fluid in:
Hydraulic and electro hydraulic servo controls;
Shock absorbers and other hydraulic equipment subject to wide temperature variations;
Hydraulic valve controls;
Hydraulic signaling systems;
Shipboard equipment;
Control gear of automatic hydro-electric installations.
The use of eni ARNICA ZF ID oils is also recommended, as an alternative to normal hydraulic
oils, for the control and power transmission systems of types of machinery which, due to
design or heavy-duty operating conditions, require oils with an extremely high Viscosity Index (ex. Ceramics and Steel Industry).
In addition eni ARNICA ZF ID oils are especially recommended for many delicate and
precision machines and instruments where variations in braking torque caused by changes in
viscosity must be contained within the closest possible limits.
Specification
ISO-L-HV
AFNOR NF E 48603 HV
DIN 51524 part 3 HVLP
CINCINNATI P-69 and P-70
SPERRY VICKERS I-286-S
Arnica ZF ID 68
Description
eni ARNICA ZF ID are ashless antiwear hydraulic oils for application in hydraulic systems where cleanliness is essential.
APPLICATIONS
eni ARNICA ZF ID oils are especially suitable as hydraulic fluid in:
Hydraulic and electro hydraulic servo controls;
Shock absorbers and other hydraulic equipment subject to wide temperature variations;
Hydraulic valve controls;
Hydraulic signaling systems;
Shipboard equipment;
Control gear of automatic hydro-electric installations.
The use of eni ARNICA ZF ID oils is also recommended, as an alternative to normal hydraulic
oils, for the control and power transmission systems of types of machinery which, due to
design or heavy-duty operating conditions, require oils with an extremely high Viscosity Index (ex. Ceramics and Steel Industry).
In addition eni ARNICA ZF ID oils are especially recommended for many delicate and
precision machines and instruments where variations in braking torque caused by changes in
viscosity must be contained within the closest possible limits.
Specification
ISO-L-HV
AFNOR NF E 48603 HV
DIN 51524 part 3 HVLP
CINCINNATI P-69 and P-70
SPERRY VICKERS I-286-S
Arnica I ID 32
eni ARNICA I are ashless antiwear hydraulic oils for application in hydraulic systems where cleanliness is essential.
Specification:
ISO-L-HV
AFNOR NF E 48603 HV
DIN 51524 part 3 HVLP
CINCINNATI P-69 and P-70
DENISON HF-0
VICKERS I-286-S
OSO
OSO ID 68
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Specification
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
OSO ID 46
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Spesification
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
OSO ID 32
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Specification:
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
OSO ID 100
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Specification:
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
OSO ID 150
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Specification:
BS 4231 HSD
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
Hydroil
Hydroil GF ID 46
eni Hydroil GF ID is a good quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives.
Specification
DIN 51524 Part I
Hydroil GF ID 68
eni Hydroil GF ID is a good quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives.
Specification
DIN 51524 Part I
Hydroil GF ID 32
eni Hydroil GF ID is a good quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives.
Specification
DIN 51524 Part I
Gear & Chains Products
Blasia
Blasia ID 150
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Specification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Blasia SX ID
BLASIA SX ID is an oil developed for the lubrication of gears and bearings operating at high temperatures. It is formulated from a synthetic base (polyalphaolefin) additive-treated to impart appropriate antirust, antiwear properties and exceptional oxidation and thermal stability.
Specification
ISO 6743-6/CKT
ANSI/AGMA D9005 D94
AGMA No. 3S
5S
6S
DIN 51517 T.3
CLP 100
220
320
Blasia FMP ID 200
The BLASIA FMP ID series are very high performance gear oils for lubricating in extreme pressure conditions (EP) the last generation industrial gear reducers, in particular, those extremely compact and of high specific power that could have problems of micropitting damages.
They are formulated with selected paraffinic base stocks and specific additives for a very wide operative exigency, (ISO-L-CKD classification).
Specification
FZG (A 8
3/90)
FZG (FVA 54)
FAG FE 8 (DIN 51819-3)
Timken OK load (ASTM D 2782)
4 balls EP (ASTM D 2783)
Blasia ID 68
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Blasia ID 220
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Blasia ID 320
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Blasia ID 460
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Blasia ID 680
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Blasia SX 220
Eni Blasia SX 220 is a synthetic oil for the lubrication of gears and bearings operating at high temperatures (continuous bulk temperatures up to 120 °C with peaks in the hottest points up to 200 °C)
The choice of a high quality synthetic basestock (PAO) and a carefully selected additive system has allowed to get very high performances with particular regard to thermal-oxidation stability.
Eni Blasia SX 220 is recommended for the lubrication of bearings of marine separators, gears and other couplings operating at high temperatures (glassforming machines, steelstrip mills, furnaces and ceramic and paper-making machinery); the product can also be used in rotary air compressors.
Specification:
DIN 51517-3 CLP
Alfa Laval
ISO 12925-1 CKT
Blasia SX 320
Eni Blasia SX 320 is a synthetic oil for the lubrication of gears and bearings operating at high temperatures (continuous bulk temperatures up to 120 °C with peaks in the hottest points up to 200 °C).
The choice of a high quality synthetic basestock (PAO) and a carefully selected additive system has allowed to get very high performances with particular regard to thermal-oxidation stability.
Eni Blasia SX 320 is recommended for the lubrication of bearings of marine separators, gears and other couplings operating at high temperatures (glassforming machines, steelstrip mills, furnaces and ceramic and paper-making machinery).
Specification:
DIN 51517-3 CLP
Alfa Laval
ISO 12925-1 CKT
Blasia ID 100
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Specification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Blasia FMP ID 320
The BLASIA FMP ID series are very high performance gear oils for lubricating in extreme pressure conditions (EP) the last generation industrial gear reducers, in particular, those extremely compact and of high specific power that could have problems of micropitting damages.
They are formulated with selected paraffinic base stocks and specific additives for a very wide operative exigency, (ISO-L-CKD classification).FZG (A 8
Specification
FZG (A 8
FZG (FVA 54)
FAG FE 8 (DIN 51819-3)
Timken OK load (ASTM D 2782)
4 balls EP (ASTM D 2783)
Blasia F ID
The eni BLASIA F ID series are very high-performance gear oils for lubricating in extreme pressure conditions (EP) the last generation industrial gear reducers, in particular, those extremely compact and of high specific power that could have problems of micro pitting damages.
They are formulated with selected paraffinic base stocks and specific additives for a very wide operative exigencies, (ISO-L-CKD classification).
Specification:
ISO 12925-1 CKD
DIN 51517 teil 3 CLP
U.S. STEEL/ AIST No. 224
ANSI/AGMA 9005-F16
Siemens MD (Flender) Rev. 15
Arum HT
Arum HT 220
ARUM HT ID 220 is a superior quality lubricant formulated from special ester-type synthetic bases which leave no deposits at high temperatures. It is additive-treated to impart antiwear properties and exceptional oxidation resistance.
Specification
ISO-L-CKD
ISO 12925-L-CKD
ANSI/AGMA 9005-D94
(AGMA 3EP
4EP
5EP
6EP
7EP)
ASLE EP
CINCINNATI MILACRON
DAVID BROWN SI.53.101 level
DIN 51517 teil 3 – CLP
FLENDER BA 7300 Table A
Muller Weingarten DT 55 005
U.S. STEEL 224
Compressor Products
Dicrea
Dicrea ID
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea SX ID
DICREA SX ID lubricants are synthetic oils with a polyalphaolefin base treated with antioxidant, antirust and antiwear additives. They are specifically designed for the lubrication of air compressors.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea ID 32
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea ID 46
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea ID 68
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea ID 100
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea SX 68 ID
DICREA SX ID lubricants are synthetic oils with a polyalphaolefin base treated with antioxidant, antirust and antiwear additives. They are specifically designed for the lubrication of air compressors.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea SX 46
DICREA SX ID lubricants are synthetic oils with a polyalphaolefin base treated with antioxidant, antirust and antiwear additives. They are specifically designed for the lubrication of air compressors.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Dicrea SX 32
DICREA SX ID lubricants are synthetic oils with a polyalphaolefin base treated with antioxidant, antirust and antiwear additives. They are specifically designed for the lubrication of air compressors.
Specification:
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Betula
Betula S 68
The BETULA S ID series are synthetic oils with superior characteristics which make them suitable for lubrication of refrigeration equipment and other machinery operating at very low temperatures.
Specification:
DIN 51503 KC
DIN 51303 KA
MM-O-2008 type II (NATO O-283)
MM-O-2008 type IV (NATO O-290)
VV-L-825b type II (NATO O-283)
VV-L-825b type IV (NATO O-290)
IRE
SABROE
ZANUSSI ELECTROLUX
Turbine Products
OTE
OTE 4ID 46
eni OTE ID products are designed to satisfy even the most severe lubrication requirements of steam, gas and water turbines. All grades are formulated utilizing highly refined group II base stocks with the latest technology additive. The wide range of viscosities available ensures that all possible lubricating requirements can be met.
Specification
DIN 51515
GENERAL ELECTRIC GEK 28413
KWU TLV 901304/01
BS 489
CINCINNATI P-38 lvl(ISOVG32)
P-55 level (ISO VG 46)
P-54 level (ISO VG 68)
OTE GT 32
OTE GT ID are superior quality lubricants developed expressly for use in industrial gas turbines. They are formulated utilizing highly refined group II base stocks with the latest technology additive to obtain the exceptional resistance to oxidation and antirust and mild EP properties.
Specification
ISO-L-TSA/-TSE/-TGA/-TGB/
ISO 8068
DIN 51515-1 L-TD
DIN 51515-2 L-TG
ASTM D 4304 type 2
ALSTOM HTDG 90117 V0001T
ALSTOM Power Sweden MAT812109
CATERPILLAR / SOLAR ES 9-224U
GM No. LJ-03-1-97
GENERAL ELECTRIC GEK 24138
etc
OTE ID 32
eni OTE ID products are designed to satisfy even the most severe lubrication requirements of steam, gas and water turbines. All grades are formulated utilizing highly refined group II base stocks with the latest technology additive. The wide range of viscosities available ensures that all possible lubricating requirements can be met.
Specification
DIN 51515
GENERAL ELECTRIC GEK 28413
KWU TLV 901304/01
BS 489
CINCINNATI P-38 lvl(ISOVG32)
P-55 level (ISO VG 46); P-54
OTE ID 68
eni OTE ID products are designed to satisfy even the most severe lubrication requirements of steam, gas and water turbines. All grades are formulated utilizing highly refined group II base stocks with the latest technology additive. The wide range of viscosities available ensures that all possible lubricating requirements can be met.
Specification
DIN 51515
GENERAL ELECTRIC GEK 28413
KWU TLV 901304/01
BS 489
CINCINNATI P-38 lvl(ISOVG32)
P-55 level (ISO VG 46); P-54
level (ISO VG 68)
OTE GT 46
Eni OTE GT 46 is a high quality lubricant specifically designed for use in gas turbines and in
combined cycle operating under severe conditions (temperatures up to 260°C ).
It’s formulated with selected base stocks and specially chosen additives to ensure excellent
oxidation stability, oustanding anti-foam properties,rapid air release and very high
demulsibility.
Its antirust/“mild EP” properties make Eni OTE GT 46 suitable in those cases where at the
turbine is associated a reduction gear unit.
Specification
ISO 8068 TSA/TSE/TGA/TGB/TGE
DIN 51515-1 TD
DIN 51515-2 TG
ASTM D 4304 Type II
GM Lubricant Standard LS2
GE GEK 28143B
GE THERMODYN ISPSH902SDI
MAN GHH BORSIG SP 079984 E 00
Siemens MAT812109
Siemens MAT812107
Guides & Slideways
Exidia
Exidia HG 32
Eni Exidia HG 32 is a premium quality lubricant especially designed for slideways, even under high loads, with circulation and total loss lubrication systems.
It is formulated with high quality base-stocks and an unique additive package that provides excellent antistick-slip, antiwear and antirust properties. Eni Exidia HG 32 is recommended as hydraulic fluid in those machines, especially grinding machines, where a single oil is used for guides and hydraulic drives lubrication.
Specification
Stanimuc GB
Stanimuc GA
DIN 51502 CGLP
ISO 11158 HG
ISO 6743/13 GA
ISO 6743/13GB
Exidia HG 68
Eni Exidia HG 68 is a premium quality lubricant especially designed for slideways, even under high loads, with circulation and total loss lubrication systems.
It is formulated with high quality base-stocks and an unique additive package that provides excellent antistick-slip, antiwear and antirust properties.
Eni Exidia HG 68 is recommended as hydraulic fluid in those machines, especially grinding machines, where a single oil is used for guides and hydraulic drives lubrication
Specification
DIN 51502 CGLP
Stanimuc GB
Stanimuc GA
ISO 11158 HG
ISO 6743/13 GA
ISO 6743/13GB
Exidia HG 68
Eni Exidia HG 68 is a premium quality lubricant especially designed for slideways, even under high loads, with circulation and total loss lubrication systems.
It is formulated with high quality base-stocks and an unique additive package that provides excellent antistick-slip, antiwear and antirust properties.
Eni Exidia HG 68 is recommended as hydraulic fluid in those machines, especially grinding machines, where a single oil is used for guides and hydraulic drives lubrication
Specification
DIN 51502 CGLP
Stanimuc GB
Stanimuc GA
ISO 11158 HG
ISO 6743/13 GA
ISO 6743/13GB